Deeper color, tighter joints and easier rinsing
Paver Sealing in Jacksonville, FL
Call (904) 474-3568 for a free paver sealing estimate at your Jacksonville home.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who can seal pavers at my Jacksonville home?
A local contractor seals pavers throughout Jacksonville, FL, and you will hear back within 1 business day, usually much sooner. The estimate is free, and booking is up to you. To begin, call (904) 474-3568.
What sealing does for Jacksonville pavers
Sealing deepens paver color, holds joint sand in place and lets pollen, dirt and algae rinse away. Picture the driveway after a hot, wet summer, gray at the edges and sandy at the seams, then dark and even again with every joint full. Driveways carry tires and oil, while pool decks carry splash and bare feet, so each area earns its own plan. Describe how each one gets used when you ask for your free estimate.
Paver Sealing Jacksonville Florida Is Proud to Serve Northeast Florida
What is included when pavers are sealed in Jacksonville?
The steps in a Jacksonville sealing visit
A sealing visit covers inspection, washing, sand and the coat itself. Washing takes the most hours. Want them explained for your home? Ring (904) 474-3568.
Walk-through
Square footage, sunken spots, broken pavers, old sealer and standing water are written down before any price is set.
Deep clean
A rotary surface cleaner and a cleaner matched to each stain lift algae, pollen film and dirt without blasting out the joints.
Joint sand
Sand fills each gap so the pavers lock together and weeds find less room to start.
Sealer coat
Sealer goes onto fully dry pavers in thin, even passes, and a roller levels it.
How can I tell my pavers need sealing in Jacksonville?
Signs and a water test for Jacksonville pavers
Watch for chalky color, joints sitting below the paver edges, sand scattered across the driveway after a storm and water that sinks in instead of beading. PaverGuard, a Jacksonville company, suggests dribbling water in a few spots, and if it vanishes at once the protection is gone. A little sand now is cheaper than relaying pavers after they wander. For a quick opinion, ring (904) 474-3568.
Which paver sealer works in Florida humidity?
Sealer finishes sold in Jacksonville
No single product suits every home, so ask which sealer the contractor plans to use and the reason. Stallone's Pro Wash, a Jacksonville company, works with Trident sealers in four finishes: wet look high gloss, wet look satin, natural matte and a penetrating sealer for natural stone. Unilock adds that a sealer should be breathable so moisture can escape. To compare options for your pavers, call (904) 474-3568.
Humidity and cloudy coats in Jacksonville
Humidity matters because trapped moisture can cloud a coat. Unilock lists a whitish film as the result of sealing over moisture, laying a second coat too soon or using too much product. Ask what each area would receive when you ask for your free estimate.
Should I choose a wet look or a natural finish?
Wet look or natural finish in Jacksonville
Pick wet look for dark, rich color with some shine, or a natural matte finish to stay near the look of new pavers. Beside a screened pool, footing counts for more than shine, so a lower sheen is often the safer pick. Under an HOA, ask whether a high gloss needs approval. To view samples of both, ask for your free estimate.
How often should pavers be resealed in Jacksonville?
Two to five years between Jacksonville coats
Expect two to five years, with a sunny driveway near the short end and a shaded walk near the long end. Safe Touch calls two to three years typical for Jacksonville, because full sun, pool chlorine and summer storms wear a coat down faster. Men's Journal gives the same two to five year range for pavers in general. Want your coat checked? Phone (904) 474-3568.
Do extra coats of sealer protect pavers longer?
Why thin coats last in Jacksonville
No. A thicker build does not last longer. Unilock advises no more than two layers in one spot and says too much product, or a second coat laid before the first sets, can leave a whitish film. One thin, even coat at the label rate does the work. When a quote sells three or four coats as added protection, ask why before you ask for your free estimate.
When is a good time of year to seal pavers in Jacksonville?
Forecast first, calendar second in Jacksonville
The forecast outweighs the calendar, though the seasons help. Safe Touch says spring, March through May, fills fast and fall is the quiet window for a two day paver job. Unilock asks for pavers dried for 24 hours before sealing and 24 to 48 hours of cure time after, so a wet week is a poor choice. For a day that fits the forecast, call (904) 474-3568.
Sealing new pavers in Jacksonville
New pavers have a wait of their own. Unilock says to hold off 60 to 90 days after an install, and that efflorescence, the white haze, can take two to three months or up to a year to fade. Sealing before it clears locks the haze in. If your pavers went in recently, share the install date when you ask for your free estimate.
Can sealing fix pavers that have sunk or spread apart?
Sunken pavers in Jacksonville need repair first
No, sealer cannot raise a low paver or close a gap. Pavers that rock under a car or hold a puddle after rain need their base repaired first, and joint sand only stays once they are level again. Find out whether leveling is built into the price or quoted separately when you ask for your free estimate.
Which areas around a Jacksonville home can be sealed?
Driveways, decks, patios and walks in Jacksonville
Driveways, pool decks, back patios and front walks can all take a coat, though each wears in its own way. The plan changes from one to the next. Start with the spot that bothers you most and ask for your free estimate.
Driveways
Tires, hot rubber and oil drips land on the driveway first, and a front yard with no shade takes the most sun. Sealing keeps color even and joints full where cars turn.
Pool decks and lanais
Pool decks take splash, chlorine and bare feet daily. Sealing here should leave a surface that drains and never turns slick.
Back patios
A patio under oaks or beside a screen enclosure stays damp, so green growth starts early. Sealing on a patio targets those shady corners and slows their return.
Walkways and entries
Walks run close to mulch, soil and sprinklers, so they stain easily. Sealing at the front door improves the first thing a guest steps on.
What causes paver trouble in Jacksonville?
Five Jacksonville paver problems to look for
Five problems keep coming up: sun fading, green growth, sand loss after storms, orange sprinkler marks and a yellow pollen film. Each costs less to handle early. To learn which ones your pavers have, ring (904) 474-3568.
1. Fading in open sun
The July mean daily high in Jacksonville is about 92 degrees, and a driveway with no shade bakes all afternoon. Stallone's Pro Wash says strong sun can fade unsealed pavers within a few summers.
2. Green growth under oaks and near water
Jacksonville has a humid subtropical climate with about 52 inches of rain a year. Shaded corners, north-facing walks and lots near the river or a pond stay damp, and algae follows.
3. Joint sand lost to storms
Stallone's Pro Wash notes that heavy afternoon storms can wash out polymeric sand before it cures. Once joints run low, pavers shift and weeds move in.
4. Orange marks from sprinklers
Safe Touch says irrigation rust needs its own treatment, not more pressure. Those marks have to come off before any coat goes down.
5. Yellow pollen film and cloudy old sealer
Pine is largely behind the yellow coating that settles on outdoor surfaces each spring, Jacksonville Today reported. Sealer laid over that film, or over a failing old coat, can cloud and peel.
What does paver sealing cost in Jacksonville?
The Jacksonville price range per square foot
Budget about $1.75 to $3.25 per square foot in Jacksonville for the clean, sand and seal together, the range Safe Touch publishes. Stallone's Pro Wash lists sealing alone from $1.90 per square foot. Size moves the rate, and condition moves it again: empty joints, pool deck pavers and failed sealer that must be stripped all raise the quote. Want a figure written for your own house? Ask for your free estimate.
Why a low Jacksonville bid deserves a question
Treat a bid far under these ranges with care, because low prices often leave prep out. If a number looks low, ask which steps it skips. Holding a quote and want a second read? Dial (904) 474-3568.
More Jacksonville paver guides
Looking for a wash alone? Head to paver cleaning and joint sand, check the places covered or return to paver sealing in Jacksonville.
| Paved area | Typical example | Clean, sand and seal |
|---|---|---|
| 300 sq ft | Small patio or walkway | $525 to $975 |
| 600 sq ft | Two car driveway | $1,050 to $1,950 |
| 1,000 sq ft | Large driveway or pool deck | $1,750 to $3,250 |
| 1,500 sq ft | Driveway plus pool deck | $2,625 to $4,875 |
Math based on the $1.75 to $3.25 per square foot that Northeast Florida paver companies published as of November 2026. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.
Why hire a local paver sealing contractor in Jacksonville?
What a local contractor knows about Jacksonville
A contractor who works around Jacksonville already plans for oak shade, afternoon storms and spring pollen. You receive the price in writing, and the choice remains yours. Start by calling (904) 474-3568.
Contractors who cover Duval County
Jacksonville spreads over more land than any other city in the lower 48. A contractor who already works your side of town knows the shade, storms and sun your pavers get.
A free look and a free price
The visit and the estimate are free, with no obligation. If the number does not suit you, say no and move on.
Published rates to hold a bid against
Jacksonville companies post their per square foot rates, and this site lists the same ranges. A bid far above or below them is worth a question.
You pick the day
Take the price in writing and decide at your own pace. The contractor standards page lists what to ask before you sign.
Ready for a free paver sealing estimate in Jacksonville?
Call or fill in the short form, and a contractor answers within 1 business day, usually much sooner.
Free, no obligation
How do Jacksonville pavers look after a fresh seal?
How does the paver sealing process work from start to finish?
Five steps for a Jacksonville sealing job
Most jobs run through the same five steps, from the first inspection to the closing walk-through. Ready for a date? Ring (904) 474-3568.
1. Measure and look it over
Measuring the paved area comes first, so the sealing quote rests on real numbers. Low spots, broken pavers, old sealer and any place water collects after rain get written down.
2. Cover and wash
Plants, screens and the garage door are covered, and the sprinklers are switched off. A rotary surface cleaner then washes the pavers at 1,500 PSI or less, the ceiling Western Interlock gives.
3. Treat the stains
Algae gets a mildew cleaner, irrigation rust gets a rust remover and failed sealer gets a stripper. Each product is tried on a small spot first.
4. Refill the joints
Once the pavers dry, sand is swept into every gap, settled and topped off. Leftover grains are blown clear so none bake onto the surface.
5. Seal and walk the job
When sealer is part of the job, a low pressure sprayer lays it down in thin passes and a roller levels it. The contractor then walks the area with you and says how long cars and feet must stay off.
Frequently Asked Questions
Why is paver sealing so expensive?
Most of the money goes to prep, not to the sealer. A full job means washing, treating stains, refilling the joints, letting everything dry and then laying the coat. Safe Touch, a Jacksonville washing company, says empty joints or failed sealer make it a two day restoration, and old sealer has to be stripped before a new coat goes on.
How long do paver sealers last?
Most last two to five years in Northeast Florida, the span Stallone's Pro Wash gives. Safe Touch calls two to three years typical and says full sun, pool chlorine and summer storms can pull it toward two. Unilock, a paver maker, says three to five years.
Is it better to spray or roll paver sealer?
Either works, and many contractors use both. Unilock says to apply with a low pressure sprayer or a roller the sealer maker approves, then back roll with a soft broom or roller to even out lap marks. How thin and even the coat lands matters more than the tool.
What is the average cost to seal pavers in Florida?
Around Jacksonville, Safe Touch publishes $1.75 to $3.25 per square foot for a clean, sand and seal. Applied to a 600 square foot Jacksonville driveway, that is roughly $1,050 up to $1,950. Stripping old sealer or refilling empty joints usually costs more.
How much is sealant for pavers?
The sealer itself is the smaller part of a contractor's price. Stallone's Pro Wash lists sealing from $1.90 per square foot, and the full clean, sand and seal runs $1.75 to $3.25 at Safe Touch. Ask what a number includes before you set two bids side by side.
Do you seal pavers before or after polymeric sand?
After. Unilock says the sand should be swept in, activated and filled to the right height before any sealer goes down. A coat laid over loose sand traps it, and a coat over empty joints lets weeds come back.
How long does a paver sealing job take at a Jacksonville home?
Plan on one to two days. Safe Touch says pavers with empty joints or failed sealer make it a two day restoration, since the surface must dry between washing and sealing. An afternoon storm can push the second day back.
Can pavers around a Jacksonville pool deck be sealed?
Yes. Stallone's Pro Wash notes that pool deck pavers face constant moisture, which speeds wear, and Safe Touch says pool decks can cost more because of joint sand. Ask about traction, because a glossy coat can feel slick underfoot.
Does Jacksonville pine pollen season change when I should seal?
It can. Jacksonville Today reported in March 2026 that pine is largely behind the yellow coating on outdoor surfaces, and sealer laid over that film seals it in. Book a wash right before the coat, or pick a date after the heavy weeks pass.
Let a contractor look at your driveway or pool deck
Share where the pavers are in Jacksonville, and a local company answers within 1 business day, usually much sooner.
Free, no obligation