Lift oil, rust and green stains off your pavers
Paver Stain Removal in Jacksonville, FL
Call (904) 474-3568 for a free estimate to lift stains from pavers at your Jacksonville home.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who removes stains from pavers in Jacksonville, and how soon will they answer?
A local contractor treats paver stains throughout Jacksonville, FL, and you hear back within 1 business day, usually much sooner. The visit and written price are free, and no one pressures you to book. To start, call (904) 474-3568.
Why a stain is a clue on Jacksonville pavers
A stain is a clue. The same pavers can hold an oil patch from a leaky car, orange rust from a sprinkler head and a green film in the shade, and each one needs a different treatment in a certain order. Say what you think made the marks, and ask for your free estimate. Photos of each mark help a contractor plan before the visit.
What left that mark on my pavers?
Six common marks on Jacksonville pavers
Start with the source, because the source picks the treatment. Unilock suggests checking under the grill, patio furniture and planters for grease drips, smoke marks, rust and leaf stains. The six marks below cover most of what Jacksonville homeowners point at. Not sure which one yours is? Ring (904) 474-3568.
Oil and tire marks
Oil from a parked car soaks into porous pavers and, Prosoco says, can keep darkening after a rinse. Unilock says to act quickly on vehicle oil.
Orange rust
Prosoco lists metal furniture, irrigation, fertilizer and tools as the sources. Safe Touch, a Jacksonville company, says sprinkler rust needs a rust treatment, not more pressure.
Green and black growth
Algae and mildew start in damp shade. The Jacksonville company Enhance says the city's humid climate lets mold and algae thrive if they are not handled promptly.
Leaf and tannin stains
Cambridge Pavingstones says leaf stains return every year, so a tree over the pavers is part of the plan.
White haze
Unilock describes efflorescence as natural salts that fade over time. Prosoco says it can come back if moisture keeps moving through the paver or base.
Paint, tar and mortar
Fresh paint must be blotted at once, Cambridge says, and mortar is very difficult to remove once hard. A contractor asks you to leave these alone.
Why does oil keep showing through after the paver is washed?
Why oil keeps showing through in Jacksonville
Pavers are porous, and oil moves down into them. Prosoco says oil can keep darkening after a rinse and needs targeted degreasing, not general cleaning. Cambridge Pavingstones says penetrated oil needs 6 to 8 hours to dry before it can be swept up, and Unilock says to leave an absorbing material on a soaked-in spot for about six hours. The takeaway is patience, not more pressure. If one spot refuses to fade, ring (904) 474-3568 and describe it.
Tire marks and tar on a Jacksonville apron
Tire marks and tar behave differently, and Cambridge lists them as separate jobs with different products. If the garage apron looks like a map of every drip since move-in, describe it when you ask for your free estimate.
Paver Sealing Jacksonville Florida Is Proud to Serve Northeast Florida
How is orange sprinkler rust taken off pavers?
How Jacksonville sprinkler rust comes off
Rust is hard to remove, Unilock says, and Safe Touch says irrigation rust needs a rust treatment instead of more pressure. Prosoco says to remove the source or the stain may come back, and it warns against wire brushes, which leave metal bits that rust later. Cambridge Pavingstones adds that rust remover damages sealer, so a sealed paver may need a recoat afterward. Ask about that when you ask for your free estimate.
Stopping the source of Jacksonville rust
The source matters. A sprinkler head that sprays the walkway keeps feeding the stain, and a fertilizer spill or a rusty planter stand can too. Prosoco says to protect nearby metal and landscaping and rinse the area completely. For the sprinkler strip along your walk, call (904) 474-3568.
Why do green and black stains come back on shady pavers?
Why Jacksonville shade grows green and black
Damp shade feeds them. Prosoco says organic growth shows up where it stays wet, and Enhance, a Jacksonville company, says the humid climate lets mold and algae thrive. Wikipedia counts about 52 inches of rain a year in the city. A cleaning removes the film, and sealing makes the next one easier to rinse. A walk under an oak will always return sooner. Want a plan for a shady side yard? Ask for your free estimate.
What are the white patches on my pavers, and are they a stain?
White patches on Jacksonville pavers
Often they are efflorescence, natural salts that rise out of the paver or the base. Unilock says it fades over time, and its sealing page says to wait before sealing a newer paver, because sealing over it locks the haze in. Prosoco says it can return if moisture keeps moving through the paver. Humid Jacksonville summers keep moisture moving, so a contractor may advise waiting. If the white came after a coat of sealer, call (904) 474-3568.
When the white came after sealer in Jacksonville
The same look can come from sealer applied over moisture, a second coat laid too soon or too much product, Unilock says. Telling these apart before any treatment saves a second job. Describe when the haze appeared when you ask for your free estimate.
Can pressure and strong cleaners take stains off by force?
Why force fails on Jacksonville stains
No, and they can add damage. Prosoco says excess pressure displaces joint sand, cuts into vulnerable surfaces and disturbs edges, while Western Interlock puts the ceiling near 1,500 PSI. Prosoco also says acidic cleaners must match the surface, and Unilock lists travertine, limestone and marble as acid sensitive. Cambridge Pavingstones says to test any agent on one or two pavers first. Ask what product and pressure are planned, and ask for your free estimate.
What is the paver stain removal process from test spot to rinse?
The order of work for Jacksonville stains
The order protects both the pavers and your plants. Cambridge Pavingstones says to test any cleaning agent on one or two pavers first, and Prosoco says to protect nearby metal and landscaping, use pressure to rinse and not to blast, and rinse the area completely. Unilock says to leave an absorbing material on a soaked-in oil spot for about six hours. Want that order for your marks? Ring (904) 474-3568.
What does paver stain removal cost in Jacksonville?
Jacksonville stain pricing from public rates
Stain treatment has no posted rate in Jacksonville, so the table is built from the cleaning and sealing rates that are public, and the products for oil, rust or paint are added after a look. Cleaning begins at $0.22 per square foot at Stallone's Pro Wash. Safe Touch publishes $1.75 to $3.25 for a clean, sand and seal. To see how your marks change the total, ask for your free estimate.
What raises a Jacksonville stain quote
A few things raise the number: oil that has been there for months, rust over a long strip, and a failed old coat that has to come off first. Ask the contractor whether the stain work is a separate line. Holding a quote you are unsure about? Dial (904) 474-3568.
| Stained area | Typical example | Cleaning, from | Clean, sand and seal range |
|---|---|---|---|
| 100 sq ft | Oil patch where a car parks | $22 | $175 to $325 |
| 300 sq ft | Walkway and rusty sprinkler strip | $66 | $525 to $975 |
| 600 sq ft | Driveway with several kinds of marks | $132 | $1,050 to $1,950 |
No Jacksonville company opened for this page publishes a separate price for stain treatment. The table uses what is public: cleaning from $0.22 per square foot at Stallone's Pro Wash and $1.75 to $3.25 for a clean, sand and seal at Safe Touch, both read in November 2026. Rust, oil and paint products are quoted after the contractor sees the marks, because Hydrowash 360 notes that deep oil or rust may need more than standard cleaning.
Will a sealer keep stains from coming back?
What sealing does for Jacksonville stains
It helps. Stallone's Pro Wash says sealer helps keep oil and rust from soaking in, and sealed pavers let most spills wipe or rinse away. It is a head start, not armor, since leaf tannin and sprinkler rust still need a quick rinse. Sealing also comes last, after stains are gone. For the full sealing picture, read the paver sealing guide or call (904) 474-3568.
Which areas at a Jacksonville home get stained most?
Where Jacksonville homes get stained most
Driveways collect oil and tire marks, and walkways pick up sprinkler rust and mulch. Pool decks show suntan lotion and algae near the screen frame. A patio under an oak holds leaf tannin. Start with the spot you see every day and ask for your free estimate.
Driveway aprons
Oil, hot tire rubber and brake dust collect where the car sits, and the garage lip stays marked longest.
Walks and entries
Sprinkler spray, mulch and planter stands leave orange and brown marks along the edges.
Pool decks and lanais
Sunscreen, algae near the screen frame and rusty chair feet show up on light surfaces first.
Patios under trees
Leaf tannin, bird droppings and damp green growth settle where the shade is deepest.
What do pavers look like after stains come off in Jacksonville?
Frequently Asked Questions
How much is it to clean pavers?
Stallone's Pro Wash, a Jacksonville company, lists paver cleaning from $0.22 per square foot, so 600 square feet starts near $132. Safe Touch publishes $1.75 to $3.25 for a clean, sand and seal. Stain treatment is quoted after the marks are seen, since deep oil or rust can need more than ordinary cleaning.
Is it good to seal pavers in Florida?
Sealing gives stains less to grab. Stallone's Pro Wash says sealer helps keep oil and rust from soaking in, so most spills wipe or rinse away. It also says strong sun can fade unsealed pavers within a few summers. Clean first, because a coat over a stain holds the stain in.
Can concrete pavers be stained?
Yes. They are porous, and oil, rust, leaf tannin and algae can all mark them. Prosoco says oil can keep darkening after rinsing, and Unilock says rust is hard to remove. Sealing, plus quick action on spills, is the main defense.
Why do my pavers have white haze after sealing?
Often it is moisture or salts. Unilock lists a whitish film as the result of sealing over moisture, adding a second coat too soon or using too much product, and says natural efflorescence can take two to three months or up to a year to fade. A contractor can tell the two apart before touching anything.
What is the orange staining near my Jacksonville sprinklers?
Most often irrigation rust. Safe Touch says it takes a rust treatment, not more pressure, and Prosoco says the source should be dealt with first or the stain may return. Cambridge Pavingstones warns that rust remover can damage sealer, so the order of work matters.
Will pressure washing remove stains from my pavers?
Not safely on its own. Prosoco says too much force displaces joint sand and cuts into vulnerable surfaces, and that pressure should rinse, not blast. Western Interlock puts the ceiling near 1,500 PSI. Stains that sit deep usually need a matching treatment, then a gentle wash.
Does leaf and pine pollen staining stop once pavers are sealed?
It gets easier to rinse, though it does not vanish. Jacksonville Today reported in March 2026 that pine is largely behind the yellow coating on outdoor surfaces. Cambridge Pavingstones says leaf stains return every year, so a sealed driveway under a tree still needs a yearly look.
How fast do I need to act on an oil spill?
Quickly. Unilock says to act fast on vehicle oil and dab, not rub. Cambridge Pavingstones says penetrated oil needs 6 to 8 hours to dry before it can be swept off. The longer oil sits, the deeper it goes, so call a contractor if the spot is still there after a day or two.
Why hire a local contractor for paver stain removal in Jacksonville?
What a local contractor knows about Jacksonville stains
A contractor who works around Jacksonville has seen the oak tannin, sprinkler rust and humid algae that mark local driveways, and tests a small spot before treating a large one. Hold the quote against the published rates on this page. To start, call (904) 474-3568.
Contractors who cover Duval County
Jacksonville spreads over more land than any other city in the lower 48. A contractor who already works your side of town knows the shade, storms and sun your pavers get.
A free look and a free price
The visit and the estimate are free, with no obligation. If the number does not suit you, say no and move on.
Published rates to hold a bid against
Jacksonville companies post their per square foot rates, and this site lists the same ranges. A bid far above or below them is worth a question.
You pick the day
Take the price in writing and decide at your own pace. The contractor standards page lists what to ask before you sign.
Ready to clear the stains off your Jacksonville pavers?
Fill in the quick form or phone in, and expect a contractor's answer within 1 business day, usually much sooner.
Free, no obligation